Agriculture, Energy & Remote Systems

Motors & Drive Solutions for Agriculture, Energy & Remote Systems

Application-engineered motors, gearmotors and air- and fluid-movement solutions for crop processing, agricultural equipment, low-power infrastructure and installations where energy, environment and service access are constrained.

Crop Drying & Agricultural Ventilation

Dependable fan and blower drives for grain drying, crop storage and livestock buildings, selected around airflow, static pressure, dust, ambient conditions, efficiency and seasonal continuous duty.

Suitable SDT solution: Smart EC, AC or BLDC motor platforms configured for direct or transmitted fan, blower, ventilation and vacuum duties.
Engineering benefit: Efficient variable-speed operation, stable airflow, controlled acoustic performance and thermal capability matched to the fan curve.
Representative capability: Smart EC core coverage 50 W–4 kW · compact AC coverage 3–750 W · broader industrial AC options

Relevant platformsSmart EC MotorsExplore More AC MotorsExplore More Brushless DC MotorsExplore More

Crop Processing & Material Handling

Gearmotors and controlled systems for cleaners, separators, feeders, conveyors and augers, developed around throughput, starting load, shaft loading, dust exposure and blockage.

Suitable SDT solution: AC inverter-duty, PMDC or BLDC/EC gearmotors with right-angle, parallel-shaft or planetary transmission and suitable control or braking.
Engineering benefit: Torque and output speed matched to transported load, incline, starts per hour and continuous or indexed operating duty.
Representative capability: Gearmotor platforms from 3 W to 8 kW · BLDC platforms from 20 W to 4.5 kW

Relevant platformsGearmotorsExplore More Brushless DC MotorsExplore More AC MotorsExplore More

Irrigation Pumps & Fluid Control

Efficient motor and geared-actuation solutions for irrigation, water transfer, drainage, valves and dampers, matched to flow, head, breakaway torque, available power and remote operation.

Suitable SDT solution: AC, Smart EC, BLDC or PMDC motors with the appropriate pump interface, speed control, feedback and environmental protection.
Engineering benefit: Motor performance aligned with flow, pressure, starting load, fluid characteristics, dosing accuracy and continuous or intermittent duty.
Representative capability: PMDC platforms 6–240 VDC and 5–950 W · Smart EC core coverage 50 W–4 kW

Relevant platformsSmart EC MotorsExplore More AC MotorsExplore More Brushless DC MotorsExplore More PMDC MotorsExplore More

Solar, Battery & Remote Systems

Low-energy motor and geared positioning solutions for solar tracking and remotely powered equipment, designed around wind load, holding torque, peak current, autonomy and long maintenance intervals.

Suitable SDT solution: Low-voltage PMDC or BLDC motors and high-ratio gearmotors configured for battery, solar and intermittently powered equipment.
Engineering benefit: Low energy consumption, dependable start-up, secure positioning and long service intervals where available power and access are constrained.
Representative capability: PMDC 6–240 VDC · BLDC 20 W–4.5 kW · right-angle, inline and planetary gearing

Relevant platformsPMDC MotorsExplore More Brushless DC MotorsExplore More GearmotorsExplore More

Motion requirements & engineering challenges

What the Application Requires from the Drive System

A credible selection begins with the real operating duty. These inputs determine continuous rating, peak capability, technology choice and the level of integration required.

Required airflow, flow rate or material throughput

Define required airflow, flow rate or material throughput as a measurable input before the motor and drive architecture is selected.

What this defines

Available energy and peak current

Define available energy and peak current as a measurable input before the motor and drive architecture is selected.

What this defines

Starting torque, blockage and overload duty

Define starting torque, blockage and overload duty as a measurable input before the motor and drive architecture is selected.

What this defines

Continuous, seasonal or intermittent operation

Define continuous, seasonal or intermittent operation as a measurable input before the motor and drive architecture is selected.

What this defines

Temperature, dust, moisture and corrosion

Define temperature, dust, moisture and corrosion as a measurable input before the motor and drive architecture is selected.

What this defines

Efficiency across the operating profile

Define efficiency across the operating profile as a measurable input before the motor and drive architecture is selected.

What this defines

Controls, feedback and remote monitoring

Define controls, feedback and remote monitoring as a measurable input before the motor and drive architecture is selected.

What this defines

Maintenance interval and accessibility

Define maintenance interval and accessibility as a measurable input before the motor and drive architecture is selected.

What this defines

Fail-safe behaviour and lifecycle

Define fail-safe behaviour and lifecycle as a measurable input before the motor and drive architecture is selected.

What this defines

Suitable technologies & solution architecture

Engineer the Complete Motion System

Remote and agricultural equipment must deliver dependable output with constrained power, changing loads and limited service access. Selection therefore begins with the full operating duty and available energy source.

Energy-matched motor platform

AC, EC, brushless DC or PMDC solutions are matched to mains, battery, solar or generator supply and the continuous and peak mechanical operating points.

Driven-equipment interface

Fan, pump, auger, feeder, conveyor or tracking mechanisms are assessed for starting load, ratio, shaft loading, alignment and protection against contamination.

Remote control and protection

Variable speed, current limiting, overload protection, simple communications and low standby demand are configured around unattended or intermittent operation.

Environmental durability

Temperature range, moisture, dust, corrosion, voltage variation, seasonal duty and maintenance intervals are included in the technical and production specification.

Representative product platforms

Featured Motor & Drive Families

Representative ratings are shown to identify the appropriate technology route. SDT can supply standard, modified and application-specific motor and drive solutions beyond the ranges currently displayed online.

Compact 3–750 W · IEC 63–225 core / project-specific to 355 · NEMA 42–215T

AC Motors

Dependable continuous-duty platforms for crop dryers, agricultural fans, pumps, conveyors and processing equipment.

Explore More

50 W–4 kW core coverage · internal- and external-rotor EC configurations

Smart EC Motors

Efficient controllable air-movement solutions for crop drying, ventilation and exhaust duties.

Explore More

50 W–8 kW published motor platforms · right-angle, inline, parallel-shaft and planetary

Gearmotors

High-ratio right-angle, parallel, inline and planetary options for augers, feeders, cleaners, conveyors and positioning.

Explore More

20 W–4.5 kW · selected windings to 20,000 rpm · Hall, encoder and drive options

Brushless & PMDC Motors

Efficient low-voltage motor platforms for battery-powered pumps, actuators and remote agricultural equipment.

Explore More

Standard, modified and purpose-developed · motor, transmission, feedback and controls

Bespoke Product Solutions

Application-specific motor, transmission, control and environmental integration for specialist agricultural and remote duties.

Explore More

Engineering support & specification route

From Requirement to Production-Ready Solution

SDT works as an extension of the OEM engineering team, supporting the route from initial duty definition through configuration, validation and dependable production supply.

Define the requirement

Establish operating points, load, duty, envelope, environment, power source, controls and commercial objectives.

Configure the solution

Select and adapt the motor, transmission, feedback and drive arrangement around the complete equipment function.

Validate & supply

Verify performance and integration, support design transfer and establish the appropriate repeat-production route.

Related applications

Continue Exploring Industries & Applications

HVAC-R & Air MovementEfficient movement of air and fluids.Explore More Material HandlingRobust motion for conveying and lifting equipment.Explore More Off-Highway EquipmentBattery-powered propulsion and auxiliaries.Explore More

Discuss your application

Start with the Equipment Requirement

Share the operating points, duty cycle, environment, mechanical envelope, power source and production objective.

Discuss Your Project

Motors & Drive Solutions for Agriculture, Energy & Remote Systems

Application-to-Solution Guidance

Crop Drying & Agricultural Ventilation

Crop Processing & Material Handling

Irrigation Pumps & Fluid Control

Solar, Battery & Remote Systems

What the Application Requires from the Drive System

Required airflow, flow rate or material throughput

Available energy and peak current

Starting torque, blockage and overload duty

Continuous, seasonal or intermittent operation

Temperature, dust, moisture and corrosion

Efficiency across the operating profile

Controls, feedback and remote monitoring

Maintenance interval and accessibility

Fail-safe behaviour and lifecycle

Engineer the Complete Motion System

Energy-matched motor platform

Driven-equipment interface

Remote control and protection

Environmental durability

Featured Motor & Drive Families

AC Motors

Smart EC Motors

Gearmotors

Brushless & PMDC Motors

Bespoke Product Solutions

From Requirement to Production-Ready Solution

Define the requirement

Configure the solution

Validate & supply

Continue Exploring Industries & Applications

Start with the Equipment Requirement